Advertisiment
Sponsored
Triumph Daytona 675 SE 2010
The British manufacturer’s high spec middleweight supersport bike, the Daytona 675 SE stands out both from the standard model and from the previous SE model thanks to new flank graphics, white striped wheel, race-inspired brake and clutch levers and a host of carbon parts from Triumph’s accessories catalogue.
Adjustable brake and clutch levers “racing” is inspired by the Daytona 675 official racing in World Supersport, while carbon makes its appearance in the panel under the tail section to isolate the saddle from the exhaust on the end of the latter, the cockpit and on the rear fender.
The suspensions of the Triumph Daytona 675 if they are fully adjustable, with ability to intervene in the setting for both high and for low speed. Unchanged the technical characteristics of the 675cc three-cylinder in-line, strengthened by a maximum output of almost 128 hp at 12,600 rpm and torque of a full and vigorous, which has no equal in the face of competition with two or four cylinders.
The Daytona is much appreciated by lovers of circuit racers, who appreciate not only the engine thrust, but also the rigor of the frame and the ability to set a set-up Buoyancy very accurate due to suspensions multi-adjustable.
Specification Triumph Daytona 675 SE 2010
General Information Triumph Daytona 675 SE 2010
- Brand : TRIUMPH
- Model : DAYTONA 675 SE
- Year : 2010
- Category : Supersport
Engine Triumph Daytona 675 SE 2010
- Engine type : 3-cylinder, 4 stroke
- Displacement : 675 cc
- Bore Stroke : 74.0 x 52.3mm
- Compression ratio : 12.65:1
- Fuel System : Fuel Injection
- Cooling system : Liquid
- Starter : Electric
- Power : 126 hp at 12600 rpm
- Torque : 73 Nm at 11750 rpm
Transmission Triumph Daytona 675 SE 2010
- Gearbox : 6 speed
- Clutch : Wet multi-disc oil
- Final drive : Chain
Chassis Triumph Daytona 675 SE 2010
- Frame type : twin-spar aluminum
- Fork rake angle : 23.9 º
- Front suspension : 41mm inverted front fork
- Rear suspension : Single shock absorber with separate tank
- Front brakes : 2 308 mm discs with 4 piston calipers
- Rear brakes : d
- Tires Front : 120/70 ZR 17
- Rear Tires : 180/55 ZR 17
Dimention and Weight Triumph Daytona 675 SE 2010
- Overall Length : 2010 mm
- Overall Width : 700 mm
- Overall Height : 1120 mm
- Seat Height : 825 mm
- Ground Clearance : 1395 mm
- Dry Weight : 162 kg
- Fuel Tank Capacity : 17.4 liters